UL 產品安全申請認證所需資料
按標準要求，廠商在測試前需提供我方下列資料：
1. 填寫：產品安全驗證申請客戶資料表 附件
2. 填寫：產品基本資料清單 附件
----此清單包括所有零件之産品型號、生産廠家、零部件編號及有關參數（電
流、電壓、功率、阻燃等級等）。
----對於具有安規認證的元器件，例如：電源線、插頭、開關、溫控器、保-險
管等，請提供歐洲認證證書複印件。與安全有關之零部件，如未具有安全
認證，請提供技術參數，包括産品型號、生産廠家、額定電流、電壓、工
作溫度等，以便由我方進行隨機測試。
＊.電路圖
＊.線路圖
----請標注實際尺寸。
＊.最終定型樣品
----2-4 個/型號（按我中心要求準備）。
＊.爆炸圖（分解圖）
產品安全驗證申請客戶資料表
附件
1. 認證標準 (Certification) ℃ UL ℃ 其他
2. 產品名稱及型號：
附上產品相關資料(如目錄、結構圖、線路圖、規格、功能等) ℃ 有 ℃ 無
3. 申請人(Applicant)
公司名稱/Name (中文/Chinese)
(英文/English)
地 址/Address (中文/Chinese)
(英文/English)
電話(TEL) 傳真(FAX) E-mail
聯絡人/負責人(中文/Chinese) (英文/English)
Contact Person/Representative
4. 工廠(Manufacturer) ℃ 同申請者 (若工廠數量在一家以上，請自行加頁一一列出)
工廠名稱/Name (中文/Chinese)
(英文/English)
地 址/Address (中文/Chinese)
(英文/English)
電話(TEL) 傳真(FAX) E-mail
聯絡人/負責人(中文/Chinese) (英文/English)
Contact Person/Representative
5. 登錄者(Listee/Recognized Company/Classified Company) ℃ 同申請者 ℃ 同工廠
公司名稱/Name (中文/Chinese)
(英文/English)
地 址/Address (中文/Chinese)
(英文/English)
電話(TEL) 傳真(FAX) E-mail
聯絡人/負責人(中文/Chinese) (英文/English)
Contact Person/Representative
Product Technical Information (產品基本資料清單)
附件
為協助驗證單位對 貴公司之產品有更進一步的了解，請提供 貴公司產品之
下列初步資料，以供正確估價或預估測試項目。若此表不便詳述 貴公司之產品，
請以其他方式說明。
1. 產品型號/Grade Designation:
If you wish to submit more than one formulation please provide a unique designation for each
formulation.
2. 原料名稱/Generic Polymer Material:
如矽膠 silicone or silicone rubber, PC, PP, ABS, PMI,……等, for each formulation。若是含填充物，
請註明最大及最小百分比。 若是共聚合物(如分子量不同)，也請註明成份重量百分比。
Please indicate the generic polymer (ABS, PPHOX, PC, etc.) for each formulation. If the material
will contain filler material, please indicate the composition of the filler material and the minimum
and maximum percent of filler that will be used in the formulation. If the material is a co-polymer,
please indicate the percent of each polymer as well as the molecular weight of the co-polymer.
3. 防火等級/Flammability Class:
(譬如: 94V-0, V-1, V-2, HB, VTM-0, VTM-1, VTM-2, HBF, HF-1. HF-2, 5VA/5VB)
V test ：啟動開關後，不需使用者持續操作即可自行運作的家電產品，其所使用的塑料需通
過 V 燃燒測試。
HB test：燈具及使用時必須由使用者持續操作的電器(家電)產品，如 hair dryer 等， 必須要
通過 HB 燃燒測試。
HBF test：針對發泡塑膠材料使用在電器產品及其他裝置的零件上(但是不用於結構支撐)
VTM test：同 V test，只是產品厚度太薄, 約 .
4. 最大及最小厚度: Min. Thickness (mm)
Max Thickness (mm)
如果只申請一個厚度，將來只能生產該厚度+10% 誤差以內的產品。
Please note that if only one thickness is specified, we will restrict your Recognition to that
thickness only.
In production an applicable tolerance, usually 10%, will be allowed.
5. 產品運送型式/Form of Shipment:
如顆粒、薄片、粉末、液體 ……….等。
(For example, pellets, sheets, powder, two liquid components, finished products etc.)
6. 所欲申請顏色/Colors:
申請 all colors 請提供 natural color(原料原色)，白色，黑色，及紅色, all colors 代表以後可以生
產任何顏色。
Natural, White, Black, and Red will represent all colors.
7. 產品成分百分比/Material Composition:
建議提供。
Please include all additives (glass, metallic, or other combustible fillers, lubricants, flame retardants,
plasticizers, UV stabilizers, etc.) as well as the total percentage of each in the final polymer. This
information will be for UL internal use only and is requested in order to help us determine what, if
any, testing will be required if you should decide to make a minor formulation change in the future.
The information is not published in any UL public document. This information is not required for
Recognition of your material but if you decide not to supply this information, additional testing will
may be encountered if you decide to make a formulation change.
8. RTI-最大操作溫度: Electrical 0C
Mechanical w/ impact 0C
Mechanical w/o impact 0C
如 silicone 及 silicone rubber 皆已經認定為 150℃，若要申請認證超過 150℃，則需要另測 Long
Term Thermal Aging Test (LTTA)。(各材料 RTI 請參閱 UL 746B Standard Table 所示)。
Depending on the use temperature in the end-use product, some materials may be required to show
temperature stability at elevated temperatures. Table of UL 746B presents a list of materials
which have been assigned a generic Relative Thermal Index (RTI) in accordance with significant
test experience and/or field experience UL has had with these materials. A copy of this table has
been attached.
If a material is not referenced in UL746B, the material will be assigned a generic RTI of 50°C. If
you wish to have a higher rating than the generic RTI, Long Term Thermal Aging in accordance
with UL746B will be required. If you feel your material may require an elevated RTI, please
contact the undersigned and we will provide you with additional information concerning this test
program.
9. 產品製造步驟/Manufacturing Process:
建議提供。
In order to determine the appropriate generic RTI for your epoxy material, we will need to know
how the material is processed (such as form molding, injection molding, etc.). Please advise if
polymerization occurs at elevated temperatures (be sure to specify curing time and temperature) or
pressures. If the material is furnished in the form of two or more liquid components we will need a
separate identifier for each component, the mixing ratio of the different components, and the curing
conditions (Temperature/Time) for the material.
10.加拿大認證/CUL: □ Yes □ No
UL將主動為您辦理，並不額外收費，除非您告知不辦理。CUL認證可以使您的產品進入加拿
大。
UL has established a Canadian Certification Service whereby your material will also receive
Recognition according to a National Standard of Canada, CAN/ No. -92. Because
the service is generally requested in most cases, we will provide CUL Recognition with every UL
Recognition unless you specifically state that you do not require this additional certification. You
should be aware that Canadian certification includes a difference in the marking requirement, as
follows:
Marking:
UL - Company name or trademark and grade designation (on wrapper, container or part).
CUL - Manufacturer's name, tradename or trademark, polymer identification, compound
number, color number, where appropriate; batch number, lot number or date of manufacture
on bag, carton or container.
If you have any questions or require any additional information about the UL Canadian
Certification Service, please contact us.
11.其他測試項目/Additional Tests: □ Yes □ No
□ H W I：Hot Wire ignition
□ H A I ：High-Current Arc Ignition Performance Level Categories
□ HVAR：High-Vortage Arc Ignition Performance Level Categories
□ HATR：High-Vortage Arc-Tracking-Rate Performance Level Categories
□ D-495：
□ C T I ： Comparative Tracking Index
□ GWI ： Glow-Wire Ignition Test
□ V R ： Volume Resistivity
□ S R ： Surface Resistivity
□ D S ： Dielectric Strength
(如 Electrical Tests or Physical Tests 等)。電氣項目包括： HAI, HWI, HVAR, HVTR, CTI,
D-495, Volume/Surface Resistivity (體積電阻與表面電阻), Dielectric Strength (耐壓)。 如果您的
產品是要用在電器成品上，可能需要做電氣測試，此項由客戶自選，但若沒，您的產品可能
不能用於電器成品或將來需要時，則可以另行補測，但 Identification Test(成份/配方比對)可能
需再測一次來與先前測試結果比對。請與您的客戶聯絡, 了解他們的成品(如電視、電腦螢幕、
電話, 烤箱, 烤麵包機,………………., etc)在向 UL 申請該成品安全認證時，需要何種額外的
安全測試項目。
H A I：產品將來會與非絕緣材料(live parts)接觸或接近 arcing parts- ½ in non-arcing parts –
1/32 in
H W I：產品將來用在 end products 上時會與非絕緣材料(live parts)接(觸)近於 1/32 in 以內
HVAR：不同 end products 上使用時，會與非絕緣導體材料接觸時都需要申請，視 end products
產品類別而定。
C T I：同 HWI 條件但
1. 導體材料有正向極/磁性。
2. 金屬材料在使用時有接地。
3. 表面暴露於使用中，能接觸得到。
D-495：產品用於高電壓電視產品上。
VR/SR 及耐壓測試：產品用於電器絕緣上或非絕緣導體材料之外殼。
The testing you require on your material will depend on the needs of the end-product manufacturer
as defined by the UL Standard for that product. We recommend checking with the end-product
manufacturer and/or a UL engineer who evaluates the end-product your material will be used in, to
determine what testing should be conducted on your material in order to meet the needs of your
clients. Please let us know if you require any assistance in contacting the UL engineer who
evaluates the end-product your material will be used in and we will forward your request to the
appropriate department.
12.相關注意事項:
第一次工廠生產檢驗/INITIAL PRODUCTION INSPECTION (IPI):
在工程部門完成報告後，UL 會通知當地的檢驗中心至貴工廠進行第一次生產檢驗 (IPI)，完
成 IPI 後，檢驗員會將臨時的報告交給您，您即授權可以使用 UL 的標誌。
Once our engineering investigation has been completed and your product is determined to comply
with our requirements, a procedure report will be prepared. We will then send a copy of the
procedure report to our field representative in your area. Our field representative will then contact
the representative at your manufacturer and arrange for a time to deliver the new report and to
conduct an IPI. The purpose of the IPI will be to determine that your product is appropriately
described in our report and that you are aware of the requirements for marking your products with
the UL Recognition mark. In order to avoid any delays please provide the following information
for each manufacturer that will be producing a marking your product with the UL Recognition
mark:
1). Complete name and address.
2). Name, telephone, and fax number of the factory representative.
3). Date you intend to begin production of UL Recognized Fabricated Parts.
季檢驗/FOLLOW-UP SERVICES:
UL 檢驗員將會每季不定期至貴工廠檢驗及每年抽驗樣品複測。
Once your IPI has been completed, you may expect to receive a visit from our field representatives
quarterly. In addition, we will pick up samples of your product from the production line yearly in
order to determine continued compliance with our requirements.
＜請您填寫完畢之後，回傳給台灣科技驗證電子郵件 mytta@，並請在主旨
欄上註明 貴公司的名字＞
敬祝 工作順利！
