- Deckblatt -
Sender First Sample Test Report VDA page 1 of
First sampling
Re-sampling
New part
Product modification
Production transfer
Address Change in the production procedures
Long production pause
New subcontractor
Product with DwSpA
Production/ Inspection and Test Plan prepared
FMEA carried out
Test Report other samples
Appendices
01 Functional Test 07 Evidence for Inspection and
Test Equipment Capability
13 Appearance
02 Dimensional Check 08 Inspection and Test Equipment List 14 Certificate
03 Material Testing 09 EU-Data Safety Sheet 15 Design Approval
04 Reliability Test 10 Haptics 16 Constituents of Purchased Parts
05 Process Capability Evidence 11 Acoustics 17 Other
06 Process Flow Chart 12 Odors
Identification Number, Supplier Identification Number Customer:
Test Report No.: Rev.: Test Report No.: Rev.:
Subject Number: Subject Number:
Drawing Number: Drawing Number:
Status/Date: Status/Date:
Revision Number: Revision Number:
Designation: Designation:
Order Call-off No./Date:
Delivery Note No./Date: Incoming Goods No./Date:
Quantity delivered: Delivery Destination:
Charge Number:
Sample Weight:
Supplier Confirmation:
It is hereby confirmed, that the sampling has been carried out according to VDA Volume 2 Chapter 4.
Name: Comment:
Department:
Telephone/Fax/E-Mail:
Date Signature
Customer Decision Overall According to Appendix:
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
Approved
Conditionally approved
Rejected, re-sampling necessary
Deviation Concession No.:
When returning, Delivery Note No./Date:
Name: Comment:
Department:
Telephone/Fax/E-Mail:
Date Signature
Distribution: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
- Prüfergebnisse -
Attachments: First Sample Test Report VDA page 2 of
01 Functional Test First sampling
02 Dimensional Check Re-sampling
03 Material Testing New part
04 Reliability Test Product modification
05 Process Capability Evidence Production transfer
06 Process Flow Chart Change in the production procedures
07 Evidence for Inspection and
Test Equipment Capability
Long production pause
08 Inspection and Test Equipment List New subcontractor
09 EU-Data Safety Sheet Product with DwSpA
10 Haptics Production/ Inspection and Test Plan prepared
11 Acoustics FMEA carried out
12 Odors Test Report other samples
13 Appearance
14 Certificate
15 Design Approval
16 Constituents of Purchased Parts
17 Other
Identification Number, Supplier Identification Number Customer:
Test Report No.: Rev.: Test Report No.: Rev.:
Subject/Drawing/Revision No./Status/Date: Subject/Drawing/Revision No./Status/Date:
Designation: Designation:
Ref.- Requirements Actual-Value Supplier Evaluation..
No. . .
Supplier Confirmation: Customer Decision
Comment:
Approved
Conditionally approved
Rejected, re-sampling necessary
Name: Name:
Department: Department:
Telephone/Fax/E-Mail: Telephone/Fax/E-Mail:
Date Signature Date Signature
- Prüfergebnisse -
Evaluation..
.
- Prüfergebnisse -
Attachments: First Sample Test Report VDA page 2 of
01 Functional Test First sampling
02 Dimensional Check Re-sampling
03 Material Testing New part
04 Reliability Test Product modification
05 Process Capability Evidence Production transfer
06 Process Flow Chart Change in the production procedures
07 Evidence for Inspection and
Test Equipment Capability
Long production pause
08 Inspection and Test Equipment List New subcontractor
09 EU-Data Safety Sheet Product with DwSpA
10 Haptics Production/ Inspection and Test Plan prepared
11 Acoustics FMEA carried out
12 Odors Test Report other samples
13 Appearance
14 Certificate
15 Design Approval
16 Constituents of Purchased Parts
17 Other
Identification Number, Supplier Identification Number Customer:
Test Report No.: Rev.: Test Report No.: Rev.:
Subject/Drawing/Revision No./Status/Date: Subject/Drawing/Revision No./Status/Date:
Designation: Designation:
Ref.- Requirements Actual-Value Supplier Evaluation..
No. . .
Supplier Confirmation: Customer Decision
Comment:
Approved
Conditionally approved
Rejected, re-sampling necessary
Name: Name:
Department: Department:
Telephone/Fax/E-Mail: Telephone/Fax/E-Mail:
Date Signature Date Signature
- Prüfergebnisse -
Evaluation..
.
- Prüfergebnisse -
Attachments: First Sample Test Report VDA page 2 of
01 Functional Test First sampling
02 Dimensional Check Re-sampling
03 Material Testing New part
04 Reliability Test Product modification
05 Process Capability Evidence Production transfer
06 Process Flow Chart Change in the production procedures
07 Evidence for Inspection and
Test Equipment Capability
Long production pause
08 Inspection and Test Equipment List New subcontractor
09 EU-Data Safety Sheet Product with DwSpA
10 Haptics Production/ Inspection and Test Plan prepared
11 Acoustics FMEA carried out
12 Odors Test Report other samples
13 Appearance
14 Certificate
15 Design Approval
16 Constituents of Purchased Parts
17 Other
Identification Number, Supplier Identification Number Customer:
Test Report No.: Rev.: Test Report No.: Rev.:
Subject/Drawing/Revision No./Status/Date: Subject/Drawing/Revision No./Status/Date:
Designation: Designation:
Ref.- Requirements Actual-Value Supplier Evaluation..
No. . .
Supplier Confirmation: Customer Decision
Comment:
Approved
Conditionally approved
Rejected, re-sampling necessary
Name: Name:
Department: Department:
Telephone/Fax/E-Mail: Telephone/Fax/E-Mail:
Date Signature Date Signature
- Prüfergebnisse -
Evaluation..
.
- Prüfergebnisse -
Attachments: First Sample Test Report VDA page 2 of
01 Functional Test First sampling
02 Dimensional Check Re-sampling
03 Material Testing New part
04 Reliability Test Product modification
05 Process Capability Evidence Production transfer
06 Process Flow Chart Change in the production procedures
07 Evidence for Inspection and
Test Equipment Capability
Long production pause
08 Inspection and Test Equipment List New subcontractor
09 EU-Data Safety Sheet Product with DwSpA
10 Haptics Production/ Inspection and Test Plan prepared
11 Acoustics FMEA carried out
12 Odors Test Report other samples
13 Appearance
14 Certificate
15 Design Approval
16 Constituents of Purchased Parts
17 Other
Identification Number, Supplier Identification Number Customer:
Test Report No.: Rev.: Test Report No.: Rev.:
Subject/Drawing/Revision No./Status/Date: Subject/Drawing/Revision No./Status/Date:
Designation: Designation:
Ref.- Requirements Actual-Value Supplier Evaluation..
No. . .
Supplier Confirmation: Customer Decision
Comment:
Approved
Conditionally approved
Rejected, re-sampling necessary
Name: Name:
Department: Department:
Telephone/Fax/E-Mail: Telephone/Fax/E-Mail:
Date Signature Date Signature
- Prüfergebnisse -
Evaluation..
.
First Sample Report VDA
Constituents of Purchased Parts (Material Data Sheets)
1. Company and Product Description
Details on the Manufacturer/ Supplier Product Details
Name: Component:
Street/ PO Box: Sample Report No.:
. Symbol/Zip Code/City: SA-No.:
Supplier Number: Order No.:
Contact Person with: Article No.:
Phone/ Fax/ E-Mail:
Delivery Note No.:
Revision Status:
Date:
Representative Signatures
2. Safety and the Environment
Materials which are subject to legal prohibition shall not be included!
Note: See VDA list of substances which have to be declared
Please mark as appropiate
w Does the component contain materials with a criticality characteristic according to Toxic
Substances Control Act/ Dangerous (or Toxic) Chemivals Ordinance?
No
Yes (Markings acc. To dangerous (or Toxic) Chemicals Ordinance and concentrations
are to be stated under 'Constituents'
w Can dangerous substances develop or be released when handling the component
properly?
(Note: See VDA list of substances which have to be declared)
No
Yes (Point 10 of the EU Safety Data Sheet is to be completed)
w Is the component 'hazardous goods' as defined by Traffic Law (Transport Law)?
No
Yes (Point 14 of the EU Safety Data Sheet is to be completed)
w Does the component contain water-endangering substances according to law relating to water?
No
Yes (Classification of water-endangering and quantity is to be divised)
w Is the component equipped with biocides?
No
Yes (Contituents > 0,1% are to be stated)
w Can the component result in a waste product to which a code number (EAK Code) can
be allocated after use or application has ceased?
No
Yes
The table overleaf is to be fully completed.
First Sample Test Report VDA
Constituents of Purchased Parts
Substances which are subject to legal prohibition must not included!!
Hazardous substances which may be created or released upon use must also be declared.
Note: See VDA list of substances which have to be declared!
3. Parts description: SA No.: Sample Report No.:
Designation:
Parts No./
Material No.
Parts description SA Component Weight [g] Material/ producer-
related product
description
Constituents
CAS-No.
Constituents Material
description
Content
Level [%]
First Sample Test Report VDA
Constituents of Purchased Parts
Substances which are subject to legal prohibition must not included!!
Hazardous substances which may be created or released upon use must also be declared.
Note: See VDA list of substances which have to be declared!
g/pool/abteil/empb/verpackungsdatenblatt Babinsky/Kautex Textron Werk Leer 23/05/2019 18:34:23
Packaging Data 1
Is Part of Initial Sample Report stand: Kautex Textron GmbH &
test report number: rev.: date of ISR:
contact person Kautex:
supplier: company
address:
contact person: supplier code:
phone: fax:
article data: description: weight:
article number Kautex: material:
article number supplier: delivery plant:
recieving plant:
packaging:
type expandable: durable:
description:
material: thickness: mm
(for paper bags)
dimensions, L x W x H [mm]:
weight [kg]: net: gross: utilisation [%]:
capacity [parts per unit]: to pile up: X
aid for packing
(foil, straps, etc.)
type of packing: settled: poured: inserted: bundled:
marking / labels:
attachments on goods: sign sticker others:
norm: VDA QS 9000 others:
Ident-No. Kautex: shown on label: shown on delivery note:
art. no. supplier: shown on label: shown on delivery note:
Are substances included in the packaging, which are hazardous according to actual norms or specifications?
norm:
hazardous materials:
part of packaging:
restrictions:
further agreements:
packaging of ISR delivery corresponds to serial packaging: yes no
The correctness of the above given data is hereby confirmed:
QS-dept. supplier:
date: sign: stamp:
(as above contact person supplier) name: sign:
to be filled out by the customer:
result: packaging and delivery approved:
packaging and delivery conditionally approved:
packaging and delivery rejected:
conditions: date:
name:
sign:
